9" Ford Gear Installation Kits

9” Ford Install Kit

F9IK  - Installation kit with crush sleeve; includes pinion nut, o-ring, support shims, housing gasket and ring gear bolts. 

9” Daytona Pinion Bearing,

spacer & seal Kit 

F9PSSBRK- Small Daytona Aluminum or Cast Iron Pinion Support  bearing kit with Timken pinion bearings, pinion seal and solid pinion spacer with shims.

(for 28 spline pinion & aftermarket pinion support)

F9SPSK - Ford 9" Solid Pinion Spacer Kit with Shims

(you can change your yoke without altering bearing preload)

F9SPSKL - Ford 9" Solid Pinion Spacer Kit with Shims for Daytona Pinion Supports

(solid spacer is longer than stock pinion support spacer)

HH7162034G8K - Ring Gear Bolts for 9" Ford, 10 pack

Deluxe 9” Ford Install Kit

F9DIK   - Deluxe installation kit with crush sleeve; includes pinion nut,   o-ring, support shims, housing gasket, ring gear bolts, pilot bearing & pinion bearings.

Complete Bearing and Installation Kit  for 9” Ford with Carrier Bearings, Pinion Bearings, pilot bearing,  solid pinion spacer, shims, nuts, pinion seal, Ring gear bolts and gasket. 

Carded in skin-pack,  white, white with customization, or PEM Board.

PEM 1 - 1.781 ID, 2.89” OD with crush sleeve

PEM 2 - 1.781 ID, 3.06” OD with crush sleeve

PEM 3 - 1.78 ID, 2.89” OD with solid pinion spacer and shims

PEM 4 - 1.78 ID, 3.06” OD with solid pinion spacer and shims

Above available in TIMKEN; add TIM to part #

PEM 5 -  Timken kit only  1.781 x 3.06"  housing with Daytona 28 spline pinion support

PEM 6 -  Timken kit only 2.00 x 3.25"   housing with Aluminum  35 spline pinion support

PEM 7 - Timken kit only 2.00 x 3.25"    housing with Daytona 28 spline pinion support

PEM 8 - Timken kit only 1.78 x 2.891" stock housing with Daytona 28 spline pinion support

Reminder:  Any Kits can be Private Labeled with a 10 Quantity Order

9" Ford Bearing Kit

Includes carrier bearings, pinon bearings, pilot bearing & pinion seal.

F9BK1625ID2891ODTIM - Timken

Carrier Bearing sizes 1.625" ID x 2.891" OD

F9BK1781ID2891OD - Neutral Brand

Carrier Bearing sizes 1.781"  ID x 2.891" OD

F9BK1781ID2891ODTIM - Timken

Carrier Bearing sizes 1.781"  ID x 2.891" OD

F9CSV - 9" Ford Pinion Crush Sleeve

F9PN35 - Large Pinion Nut for 35 spline 

9" Ford Ring & Pinion Kit

F9RPKSS - Ring & pinion kit with solid spacer & shims: includes pinion nut, o-ring, support shims and housing gasket.

F9HGSK - Housing Gaskets - 5 pack for 9" Ford

9" Ford Ring & Pinion Kit

F9RPKCS- Ring & pinion kit with crush sleeve includes:  pinion nut, o-ring, support shims and housing gasket.

9” Large Pinion Bearing,

spacer & seal Kit 

F9PSLBRK- Large Aluminum Pinion Support  bearing kit with Timken pinion bearings, pinion seal and solid pinion spacer with shims.

(for 35 spline pinion & aluminum pinion support)

PLM102949/910Kit - Two - 1.781" Carrier Bearings with Races

F9SPSK-35  - Ford 9" Solid Pinion Spacer Kit with Shims for 35 spline pinion

Click Tabs below for Detailed Product Information

F9PN - 9" Ford Pinion Nut

F9PSSK - 9" Ford Pinion Support Shims 

Six 5 bolt shims; .10, .12, .14, .16, .18 & .20"

Ford 9" Pinion Support Seals

F9PS7044  -  for 28 spline stock pinion shaft

F9PS7044V  -  high temperature, low drag with viton lip

F9PS35  -  for 35 spline large pinion shaft

F9PS3604  -  small outer diameter ( rare )