8 inch XL Tranny
Slip Yoke
GN Floater Hub

  • 5 x 5”  Bolt Circle Assembly
  • 5 x 4.75” Bolt Circle Assembly
   
Wheel Studs – 5 Pak

  • Press in;  5/8" coarse XL studs with machined flat on head- so they can be                                   easily pressed into hubs

  • Screw in;  5/8" to screw in PEM, ACE or Winters 5 x 4.75" Bolt Circle hubs

Rear Ends, Housings, Axles, and Hubs
Click Tabs below for Detailed Product Information
9” Ford New Stamped Center Housing
  
These now fit 9" Ford 2.89", 3.062" & 3.25" carriers,
weigh 18 lbs and are  .160" wall thickness.


Now approved by IMCA for use as a OEM replacement!
9” Ford Floater Housing
Standard .188" wall DOM tubes

OPTIONS:
  • with New Center 
  • with Reconditioned Center  
  • with .125"  Chrome Moly Tubes
  • with GM Metric Control Arm Mounts
  • Radiused Lower Mounts for Metric 
9” Ford Floater Complete Assembly
Standard .188" wall DOM tubes

Includes GN  floater housing, hub assemblies with
.810 brake rotors, axles, seals & bearing kits.


  • New Center complete Floater Assy 
  • Reconditioned Center  complete Floater Assy
  • Reconditioned Center with GM Metric Control Arm Mounts
  • choose 5 x 5” or  5 x 4.75” Bolt Circle  ....  4.75" additional cost
  • Wide 5 Solid Axle Spline (28 or 31) 
  • option  Wide 5 Gundrilled Axle Spline 31 only
  • option .125" or .180" wall thickness Chrome Moly Tubes

Wide 5 Axles Double Spline  Floater Axles

  • Solid , 8620 Heat Treated Steel

  • Gundrilled,  8620 Heat Treated in the USA
GN Snout with Tube

Lengths,  24" thru 32”, every inch or custom lengths available.
We turn our axle tubes in a lathe after the snouts are welded in.
NOTE:  24" fits both sides of  60" centered Quick Change.

  • GN Snout with Tube
  • GN Snout  for 2.5" GN bearing, 4130 material
  • GN RH Nut
GN Hub Replacement Parts

  • Drive Flange Kit
  • GNHBAK Bearing Kit
  • Dust Cap Kit
  • GN Bearing,  L610549
  • GN Race,   L610510
  • GN RH Nut 
  • GN Lock Washer
  • GN Hub Seal
  • Hub Snap Ring
  • O-Ring  for drive flange
  • Axle Seal (wide 5 or GN)
  • GN Dust Cap
Custom 9" Ford Rear End Housings

  • made to order
  • build to your diagram or prints
  • non refundable


Clink Images for Links to Product Information Pages
Flanged Axles for 9" Ford

33” long with 8 3/4” of inner spline ( 28 or 31).

3 bolt patterns on hub—5 x 4.5”. 5 x 4.75” or 5 x 5”.


pemracing.com is a manufacturer of general product lines in the field of automobiles to the order of and specifications of others